Use this EPC calculator to see what it would take to raise a home's energy rating: which improvements, in what order, what each is expected to cost and the rating after each one. It works from the recommendations on that home's own certificate, so the answer is for your address, not for an average house.
Figures come from the Energy Performance of Buildings Register for England and Wales. They are the assessor's, as printed on the certificate.
EPC improvement calculator
Enter your postcode and pick your address. The figures come from the steps on that home’s own certificate.
How the calculator works
Every Energy Performance Certificate lists recommended improvements in a set order. For each one the certificate gives three things:
- an indicative cost, usually as a range
- a typical yearly saving on energy bills
- the rating after the step, which is the score your home would have once that step and every step above it is done
The calculator reads those steps from the government register and adds them up until they reach the band you choose. It does no modelling of its own.
The order matters. The rating after step 3 assumes steps 1 and 2 are already done, so you cannot pick one step from the middle of the list and expect the rating shown beside it.
EPC bands and scores
| Band | Score |
|---|---|
| A | 92+ |
| B | 81 to 91 |
| C | 69 to 80 |
| D | 55 to 68 |
| E | 39 to 54 |
| F | 21 to 38 |
| G | 1 to 20 |
A home on 66 needs three more points for band C. A home on 55 needs fourteen.
What the result does and does not tell you
- It is the assessor's estimate, not a new assessment. The scores were produced by the assessor's software on the day the certificate was issued.
- Costs are indicative. They are a guide to scale, not a quote, and prices move. Check the certificate date shown with your result.
- Only listed steps are counted. If a measure is not on the certificate, the calculator does not include it.
- Work done since the certificate is not reflected. If you have already insulated the loft or replaced the boiler, the rating shown as "now" is still the old one.
For typical prices by measure, see our EPC improvement costs guide. For the cheapest order to do things in, see how to improve an EPC from D to C.
Landlords: the proposed band C standard
The legal minimum to let a home in England and Wales today is band E. The government has said it intends to raise that to band C by 1 October 2030 for privately rented homes, with a proposed cost cap of £10,000 per property. Neither is law yet.
Set the calculator to band C to see how your rental stands against that proposal:
- If the steps reach band C, you get the indicative cost of getting there.
- If the steps stop short of band C, the calculator tells you by how many points.
Our landlord EPC rules guide explains the proposal, the cost cap and how exemptions are expected to work.
After the work: getting the new rating
Your rating does not update itself. It changes when an accredited assessor carries out a new assessment and registers a new certificate, which then replaces the old one as the current certificate. Keep invoices and installation certificates so the assessor can record insulation they cannot see.
If you are not sure whether your current certificate is still in date, check whether your EPC is still valid.
Link to this calculator
Letting agents, landlord groups, installers and journalists are welcome to link to this calculator. It is free to use.
Sources
- GOV.UK: Find an energy certificate
- Ministry of Housing, Communities and Local Government: Get energy performance of buildings data
- GOV.UK: Domestic private rented property: minimum energy efficiency standard, landlord guidance